Behringer CM1A

11

Eurorack Modul

  • MIDI-zu-CV Interface
  • 16Bit Converter
  • monophoner und duophoner Betrieb möglich
  • 2 CV-Ausgänge
  • 2 Gate-Ausgänge
  • umschaltbar zwischen S-Trigger und V-Trigger
  • USB-B Port
  • MIDI In/Thru
  • Strombedarf: 70 mA (+12 V) / 10 mA (-12 V)
  • Breite: 6 TE
  • Tiefe: 52 mm
Erhältlich seit Januar 2022
Artikelnummer 523241
Verkaufseinheit 1 Stück
Breite 6 TE / HP
71 CHF
Inkl. MwSt. zzgl. 15 CHF Versand
In 6-8 Wochen lieferbar
In 6-8 Wochen lieferbar

Dieses Produkt trifft bald bei uns ein und kann anschließend sofort verschickt werden.

Informationen zum Versand
1

11 Kundenbewertungen

4.5 / 5

Sie müssen eingeloggt sein, um Produkte bewerten zu können.

Hinweis: Um zu verhindern, dass Bewertungen auf Hörensagen, Halbwissen oder Schleichwerbung basieren, erlauben wir auf unserer Webseite nur Bewertungen von echten Usern, die das Equipment auch bei uns gekauft haben.

Nach dem Login finden Sie auch im Kundencenter unter "Produkte bewerten" alle Artikel, die Sie bewerten können.

Bedienung

Features

Verarbeitung

8 Rezensionen

M
Gute Basis
Mr.Blues 31.01.2022
Pro:
+ Endlich mal ein MIDI2CV Modul, dass das Pitchbend Rad direkt auf dem CV Signal ausgibt (Einstellbar 1-12 Halbtöne)
+ Hohe Auflösung mit 16Bit DAC

Contra, bzw Wunschliste für Firmwareupdates ...
- Das TRIG Signal wird nicht "Re-triggert", d.h. beim Legato Spielen wird kein neuer Trigger ausgelöst, sonder nur die Tonhöhe am CV geändert, mit High-Note-Priority.
Wünschenswert, wäre es wenn die Note-Priority und das retiggern per Software einstellbar wären.
- im Mono Modus geben beide CV und TRIG die gleiche Note aus,
wünschenswerter wäre 2 CV/TRIG Paare auf unterschiedlichen MIDI Kanälen
oder den zweiten CV konfigurierbar für andere MIDI Controller machen

Alles in allem eine Klare Empfehlung +++
Alles was das Interface noch nicht kann ist nice to haphe, aber kann ja (als kleine Anregung an Uli) noch per Firmware geupdatet werden, was ja auch schon bei diversen Synthies gemacht wurde ...
Bedienung
Features
Verarbeitung
0
0
Bewertung melden

Bewertung melden

W
Völlig ausreichend
Wiesolator 31.05.2023
Das Modul kaufte ich mir für das Behringer 100erter-System als MIDI-Interface. Es kann nebenbei noch Masse-Trigger, das brauche ich aber nicht. Die positiven Trigger reichen überall als Trigger, und die VC's sind ebenso sauber und stabil.
Ich denke darüber nach, meine Döpfer A-190er alle zu verkaufen, da dieses Modul kleiner ist, und auch stabil.
Bedienung
Features
Verarbeitung
0
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
R
Nice MIDI-CV module. Make sure to calibrate it!
Radu7 25.02.2022
This module made a nice addition to my Behringer System 100 rack setup. Everything worked as designed save a few issues:

1. The Behringer Synthtribe 2.5.7 app constantly crashed and was unusable for configuring the CM1A. Going back to Synthtribe 2.5.5 worked perfectly. I reported the issue to Behringer so perhaps it will be rectified in the next release.

2. The scaling on the CM1A was terrible out of the box. It was unable to play two octaves in tune. This can be corrected using the calibration portion of the Synthtribe 2.5.5 app, but there are no instructions for this and Behringer support appear to be unaware this feature even exists. There is an incomplete diagram on the calibration page for the hookup to your DMM (you need a quality DMM with at least 3 decimal places of accuracy) and the process does not work well if you do not place a load (100KOhm resistor, for example) that approximates the impedance of the VCO you are calibrating the CM1A for.
After calibrating using Synthtribe with a suitable resistor across the DMM test leads it scales across 4 octaves quite well.

3. Does not play well with passive mults at all. This is common with any CV used for pitch control, but the CM1A is very sensitive to this when compared to other MIDI-CV modules I've tested. You need a buffered mult if you need to use the CV outs with more than one input each if you expect accurate scaling when controlling pitch.

None of the 'issues' I mentioned above are out of the ordinary for a MIDI-CV module in general, but could put off someone new to modular synths or cause them to return the module thinking it was faulty when it simply needed calibration, etc...
Bedienung
Features
Verarbeitung
7
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
S
TOP QUALITY
Sammysammy1 09.03.2022
Very easy to use and the quality is great
Bedienung
Features
Verarbeitung
1
0
Bewertung melden

Bewertung melden