Doepfer A-138b Vintage Edition

21

Mixer Modul

  • Mischer mit logarithmischen Potentiometern
  • vorrangig zum Mischen von Audio-Signalen
  • Vintage Edition mit schwarzer Frontblende
  • Breite: 8 TE / HP
  • Tiefe: 35 mm
  • Strombedarf: +10 mA (+12 V) / -10 mA (-12 V)
Erhältlich seit April 2016
Artikelnummer 383631
Verkaufseinheit 1 Stück
Modulart Mono
Breite 8 TE / HP
56 CHF
Inkl. MwSt. zzgl. 15 CHF Versand
Sofort lieferbar
Sofort lieferbar

Dieses Produkt ist auf Lager und kann sofort verschickt werden.

Informationen zum Versand
1

21 Kundenbewertungen

4.8 / 5

Sie müssen eingeloggt sein, um Produkte bewerten zu können.

Hinweis: Um zu verhindern, dass Bewertungen auf Hörensagen, Halbwissen oder Schleichwerbung basieren, erlauben wir auf unserer Webseite nur Bewertungen von echten Usern, die das Equipment auch bei uns gekauft haben.

Nach dem Login finden Sie auch im Kundencenter unter "Produkte bewerten" alle Artikel, die Sie bewerten können.

Bedienung

Features

Verarbeitung

14 Rezensionen

PJ
Zentrales Modul.
Peter J. M. 11.06.2013
Dieser 4in1-Mixer in log.-Ausführung ist besonders gut für Audio-Signale geeignet, z.B. VCO-Wellenformen und/oder Noise zusammenführen und die Summe in das Filter weiterreichen oder zwei getrennte Synth-Voices stacken. Ich hätte mir aber noch individuelle Ausgänge pro Kanal gewünscht, um das Modul auch als Abschwächer benutzen zu können, daher ein Punkt weniger für die Features.
3
1
Bewertung melden

Bewertung melden

L
Vierfach Mixer
Luke3365 03.04.2015
Tolles Modul, tut was es soll und das ohne Probleme, 'Döpfer-Typisch' hervorragende Verarbeitung (Buchsen und Potis sitzen bombenfest..), der Klang ist relativ neutral (für sehr audiophile Anwendungen können die op-amps auf der Platine natürlich ausgetauscht werden).
Alles in Allem gibts an dem Teil nichts zu meckern, der Preis stimmt auch.
1
0
Bewertung melden

Bewertung melden

So
gibt's auch in Schwarz
Son of MooG 03.06.2017
Modul A-138b ist ein simpler 4-1 Mixer vornehmlich für Audio-Signale, mit dem ich beispielsweise alle Waveforms meines RS-95e VCOs zum Filter schicken kann. In der Vintage Edition sieht es gleich viel edler aus, was mir den Aufpreis auch wert ist.
0
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
B
Doepfer A-138-B Mixer
Blair 18.11.2013
The A-138b is essentially a 4 into 1 mixer optimised for audio signals rather than control voltages. the 'b' in the name means the the mixer uses logarithmic rather than linear potentiometers.

For me the A-138b is an essential piece of equipment because it enables me to sum the outputs of up to 4 sound sources (for instance VCO's or noise sources) before sending the combined output to my A-108 Low pass filter module.

With one input employed, and with the channel and master levels set to 10, the volume of the output is the same level as the input signal. in other words, this module will not increase the gain of an input, it will only attenuate it.

When using multiple inputs I find I have to reduce the levels of the individual channels quite a lot, otherwise the output from the mixer becomes to much for next module in the chain. So if I am using 3 inputs, I will use a maximum of about 33% of each channel's volume.

The mixer appears to operate very quietly. It does not introduce much 'hiss' into the sound. Some reviewers have found otherwise , so it may be that my ears are not as sensitive as theirs.

I have rated the A-138b as 5 stars except for features, which I have given a 4 for. The reason for this is that the Doepfer website indicates that with no input into channel 1, the channel 1 level will act as a +5 volt DC offset. In other words, the unit *can* increase the level beyond that of an input signal. However, my unit doesn't work like this. As delivered, all 4 inputs on my A-138b work in the same way. The manual says there is a jumper I need to re-position on the rear of the circuit board to achieve the +5 volt DD offset with input level 1. I think this option should have been made available as a toggle switch on the front panel. It would be useful on occasions when I am only using 3 inputs, but I do not want to have to remove the unit from its case and re-position a jumper each time to achieve this!

Overall, another useful and great value unit from Doepfer, in my opinion.
3
0
Bewertung melden

Bewertung melden