Harley Benton Dullahan-FT 24 Roasted IB

Headless E-Gitarre

  • ergonomisch geformter Erlenkorpus
  • geschraubter roasted Canadian Riegelahornhals
  • roasted Ahorngriffbrett
  • schwarze Offset Dot Griffbretteinlagen
  • Halsprofil: Modern C
  • Griffbrettradius: 350 mm
  • Mensur: 648 mm
  • Sattelbreite: 42 mm
  • Graph Tech Tusq XL Sattel
  • 24 Edelstahl Jumbo Bünde
  • Tonabnehmer: Roswell HAF-B-BK AlNiCo-5 (Steg) und Roswell HAF-N-BK AlNiCo-5 (Hals) Humbucker
  • Regler: Master Volume und Master Tone
  • 5-Wege Schalter: Steg-Humbucker, Hals und Steg Single Coils, Hals und Steg Humbucker, Hals Humbucker parallel, Hals Humbucker
  • Besaitung ab Werk: Daddario EXL 110 .010 - .046 (Art. 104555)
  • schwarze Hardware
  • Farbe: Ice Blue Gloss
  • inkl. Gigbag

Weitere Infos

Farbe Blau
Korpus Erle
Hals roasted Ahorn
Griffbrett Roastet Ahorn
Bünde 24
Mensur 648 mm
Tonabnehmerbestückung SS
Tremolo Nein
Inkl. Koffer Nein
Inkl. Gigbag Nein

So haben sich andere Kunden entschieden

Das kaufen Kunden, die sich dieses Produkt angesehen haben:

Harley Benton Dullahan-FT 24 Roasted IB
48% kauften genau dieses Produkt
Harley Benton Dullahan-FT 24 Roasted IB
Sofort lieferbar
Sofort lieferbar

Dieser Artikel ist auf Lager und kann sofort verschickt werden.

Informationen zum Versand
525 CHF In den Warenkorb
Harley Benton Dullahan-FT 24 BKS
23% kauften Harley Benton Dullahan-FT 24 BKS 469 CHF
Harley Benton Dullahan-AT 24 TBK
13% kauften Harley Benton Dullahan-AT 24 TBK 425 CHF
Harley Benton HB JA-60 OW
2% kauften Harley Benton HB JA-60 OW 166 CHF
Fender Squier Bullet Mustang HH IMPBL
1% kauften Fender Squier Bullet Mustang HH IMPBL 133 CHF
Unsere beliebtesten Sonstige Bauarten
2 Kundenbewertungen
  • 5
  • 4
  • 3
  • 2
  • 1
4.5 /5
  • Features
  • Sound
  • Verarbeitung
Gesamt
Features
Sound
Verarbeitung
Top Einsteiger+ Modell in die Headless-Welt
Garbin, 05.09.2020
Eins vorweg: Preis / Leistung ist hier unschlagbar.

Die Gitarre bietet Top features in dieser Preislage und stellt mehr als nur ein Einsteiger-Modell im Headless Bereich dar.

Pros:
-Roasted Neck mit toller Haptik / Bespielbarkeit
-Humbucker haben satten Output + klassische Ibanez Schaltung erlaubt variantenreiche Sounds
-sehr attackreiches Ansprechverhalten
-erstaunlich resonant
-mit richtigem Set-Up äußerst stimmstabil (kam out of the box PERFEKT gestimmt)

Cons:
-minimale Verarbeitungsmängel (nur optisch)
-Halsprofil etwas satter als mancher mag (spürbar mehr als z. Bsp. ESP/ Ibanez Wizard)
-Tuning System recht fummelig und im Dauereinsatz evtl. vorzeitig abgenutzt

Fazit:
Wer schon immer mal eine Headless Gitarre haben wollte, ohne gleich 2.000€ zu investieren, sollte hier unbedingt zuschlagen. Darüber hinaus ist diese Gitarre an sich ein sehr gutes Instrument. Das Gesamtpaket stimmt einfach. Die Kombination aus Hals+Pickups+Ansprechverhalten lassen in dieser Preisregion keine Wünsche offen. Einzges Manko ist die Qualität des Tuning-Systems: im Dauereinsatz ist hier vermutlich schnell die eine oder andere Mechanik abgenutzt, dennoch für diesen Preis mehr als ausreichend.
Klare Kaufempfehlung.

Als nächstes Modell-Upgrade dann bitte mit Fanned-Frets. Danke Thomann. ;)
Hilfreich · Nicht hilfreich · Bewertung melden
Bewertung melden...

Finden Sie diese Bewertung falsch oder aus irgendeinem Grund unzumutbar?

Meldung abschicken
gb Automatisch übersetzt (Original zeigen)
gbOriginalbewertung (Übersetzung anzeigen)
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
Gesamt
Features
Sound
Verarbeitung
Still the best budget headless, but with flaws
Mojojojoe, 14.09.2020
This will be a long, nit-picky review, here is a quick summary for busy people:
It's the best budget option in the headless category for sure, but it's still a value guitar with knockoff version of relatively new hardware designs, don't expect a Kiesel or Strandberg quality. I've had a much better experience with the Harley Benton Fusion HSH for the same money.
I probably would have returned the guitar if I didn’t live on the opposite side of the Earth, due to the difficulties I had with the hardware. There definitely is a learning curve especially for those who are not familiar with locking tremolo systems, be prepared for it if you’re considering this guitar.
However once the set up was done, it plays fantastic and the tonal options are great too. I’m quite pleased with the performance of the guitar for sure.

Pros:
• Form factor – super comfortable to play in any position, and travel friendly
• Jumbo SS frets
• 5-way switch wiring provides useful tonal options
• Excellent tuning stability once set up correctly

Cons:
• Factory setup was subpar and I can see why because it’s a total pain in the ass to setup – maybe string changes will become easy eventually, but I’m really not keen to set this guitar up again. Hoping the roasted maple neck doesn’t move at all in the future.
• Too many small parts in the hardware, I’m scared to take it to rehearsals/gigs. If I accidently break a string, I know I will struggle to replace the string quickly, and potentially lose the small screws, plates, hex keys and whatnot.
• A couple of tuners are hard to turn, making fine tuning a bit tricky.

Future improvements that I would consider:
• Upgrade the hardware
• Fretboard rolled and fret ends rounded a bit more
• Get fret levelled and polished
• Swap out the pickups eventually


Here we go into the details:

A little bit of my background:
I've been playing for almost 20 years, owned several quality guitars including a couple of Fenders and played some of the finest instruments available in the market during my music school days. Now only playing as a hobby, so not really keen to spend big money anymore and I found peace with affordable quality gears.
I've been interested in this model ever since the first prototype was revealed at TGU19 but unfortunately I missed out on the first batch while waiting for a decent review. After the long wait I finally pulled my trigger on this roasted maple model and received the guitar in 8 days from Germany to New Zealand.

The body/overall form factor:
The guitar is very small, light, well balanced, and sits comfortably in all playing positions. The contours on the body really enhances the playing experience. It feels like driving a hatchback car after driving big sedans all your life.
The gig bag is a nice touch, small, decently padded and the guitar is light enough so I wouldn’t worry about getting damages while carrying around under normal conditions.
I’m not sure if I’m 100% happy with the colour, but they didn’t give me an option with the matte black body and the roasted maple neck.

The neck/fretboard:
The neck profile feels the same as the HB Fusion HSH that I had briefly. Modern C with smooth oil finish. The roasted maple smells nice. The fretboard (14 inch) is a bit flatter than how I prefer my electric guitars, but I didn’t have any issues with it so far.
The fretboard edges are rolled off and not sharp by any means, but I’ll put some more work into it to make it rounder. Same goes to the fret ends. Purely personal preference.
The frets are modern, jumbo SS frets. Unfortunately these are not polished to the highest standard, and I can see horizontal sanding marks most likely from levelling process that haven’t been fully buffed out. The rough surface is slightly noticeable when doing vibratos and bends. This will take some effort to buff out fully as the material is SS.
Doesn’t take much away from the playing experience, and still feels better than nickel frets on other guitars in this price range, but I can’t help but compare with my other guitar with mirror-polished SS frets which has that glassy slippery feel.
Also the frets are not perfectly levelled which again, is to be expected at this price point, I will eventually get them levelled and polished.
The neck was too straight with no relief when it arrived, but I was able to correct this easily with the truss rod adjustment which was smooth and responsive.
The colour of the fretboard is much lighter than the neck, both roasted maple but probably from a different blank. I didn’t mind this too much, but FYI.

Electronics:
The volume and tone controls work fine, and I think there is even a capacitor wired for high pass filter in the volume pot. The sound cleans up nicely without losing the clarity when I roll the volume down.
Pickups are surprisingly decent actually. Obviously would be a lot better with a pair of Suhrs or Seymour Duncans but I don’t think I’ll swap them out immediately.
The 5-way switch wiring is amazing. All positions give me a variety of very useful tones from the HH configuration, almost equivalent to a HSS strat.
The knobs and switches are in the right place, and do not get in the way of playing.

Hardware/set up:
This is where the guitar loses a lot of points. I’m usually very comfortable doing my own setups and DIY work on my guitars.
When I received the guitar, the action was high, like 4-5mm above 12 fret high. Ideal action for me is somewhere between 1.5-2mm.
To lower the action, first I have to loosen the small hex screw which locks the saddle height, which is odd because the saddle should not move anyway when there’s a string pushing it down, and the saddle wasn’t easy to turn at all anyway even with the strings loosened and moved out of the way. It’s very hard to turn with picks or even with flat head screwdrivers because of the way the slot is shaped, it feels like you almost need to have a dedicated tool just to turn these saddles.
After some serious effort, I realised the saddles reached the end and won’t go further down but the action was still far from ideal. This is where I had to bring the guitar to my local luthier and get the neck shimmed. Shimming on a bolt-on guitar is not a big deal at all, even a lot of Fenders get them at the factory but it would’ve been nice to have it shimmed and action set up before shipping out.
The luthier has shimmed the neck and raised the saddles a bit so I have some room to adjust for my preferences, currently the action sits at 2mm but I can’t go lower because the frets are not perfectly levelled as mentioned before, and will cause fret buzz.
The next step was to replace the factory strings with my preferred strings and get the intonation set up.
In order to do this, I need to loosen the strings, loosen the lock behind the nut with a big hex key, loosen the lock behind the saddle with a small hex key, and loosen the saddle from the plate for intonation adjustment with a medium hex key. Two hex keys required just to change strings and three if you want your guitar intonated.
Also I need to make sure that I don’t accidently loosen the lock behind the nut which holds the strings too much, otherwise the screw will fall off - which is not the end of the world, but there is a tiny round metal plate under the screw which helps hold the strings without breaking them when screwed down – this plate is not glued down, and one of mine fell out and fell between the switches in my Line 6 Helix. I had to open up my Helix just to get this tiny metal piece out, because I don’t know where I can get the replacement if I lose it. Too many small loose parts without any spare is a big downside.
And that lock behind the nut is rather slippery, so I needed to really tighten it to ensure the string is held in place, but at the same time I can’t tighten too hard because you may break the strings. I went through a couple extra each of the 1st, 2nd and 3rd strings because of this. I was seriously stressed out during this process which took me over 2 hours, and I still don’t know how hard I need to lock my strings without breaking them.
One last downside about the hardware, my other strings are fine but for the middle D and G strings, the tuner is very hard to turn. I’ve tried applying Teflon lube between the washers and the bearings, but didn’t help much. The bright side is since it’s essentially a double locking mechanism like a Floyd Rose, the tuning stability is fantastic and I don’t need to tune very often.

This may seem like a negative review, but I just wanted to make sure all the potential buyers are fully aware of what they’re getting into, because I certainly did not know about these when watching Youtube reviews.

Overall I’m quite happy with the guitar and keen to improve it where I can.
Hilfreich · Nicht hilfreich · Bewertung melden
Bewertung melden...

Finden Sie diese Bewertung falsch oder aus irgendeinem Grund unzumutbar?

Meldung abschicken
Griffbrett: Roastet Ahorn
Harley Benton Dullahan-FT 24 Roasted IB
(2)
Harley Benton Dullahan-FT 24 Roasted IB
Zum Produkt
525 CHF

Harley Benton Dullahan-FT 24 Roasted Ice Blue, Headless E-Gitarre; Korpus: Erle; Hals: Roasted Canadian Flame Hard Ahorn; Griffbrett: Roasted Ahorn; Halsbefestigung: geschraubt; Comfort Body...

  • Grundbauform: Headless
  • Farbe: Blau
  • Korpus: Erle
  • Hals: roasted Ahorn
  • Griffbrett: Roastet Ahorn
  • Bünde: 24
  • Mensur: 648 mm
  • Tonabnehmerbestückung: SS
  • Tremolo: Nein
  • Inkl. Koffer: Nein
  • Inkl. Gigbag: Nein
Harley Benton Dullahan-FT 24 BKS
(4)
Harley Benton Dullahan-FT 24 BKS
Zum Produkt
469 CHF

Harley Benton Dullahan-FT 24 BKS, Headless E-Gitarre; Korpus: Erle; Hals: Ahorn; Griffbrett: Ahorn; Halsbefestigung: geschraubt; Comfort Body Contour; Halsprofil: Modern C; Einlagen: Black Offset...

  • Grundbauform: Headless
  • Farbe: Schwarz
  • Korpus: Erle
  • Decke: Keine
  • Hals: Ahorn
  • Griffbrett: Ahorn
  • Bünde: 24
  • Mensur: 648 mm
  • Tonabnehmerbestückung: HH
  • Tremolo: Nein
  • Inkl. Koffer: Nein
  • Inkl. Gigbag: Nein
Harley Benton Dullahan-AT 24 TBK
(4)
Harley Benton Dullahan-AT 24 TBK
Zum Produkt
425 CHF

Harley Benton Dullahan-AT 24 TBK, Headless E-Gitarre; Korpus: Mahagoni; Decke: geflammtes Ahornfurnier; Hals: Ahorn; Ebenholz Griffbrett; Halsbefestigung: geschraubt; Comfort Body Contour;...

  • Grundbauform: Headless
  • Farbe: Schwarz
  • Korpus: Mahagoni
  • Decke: Ahorn
  • Hals: Ahorn
  • Griffbrett: Ebenholz
  • Bünde: 24
  • Mensur: 648 mm
  • Tonabnehmerbestückung: HH
  • Tremolo: Nein
  • Inkl. Koffer: Nein
  • Inkl. Gigbag: Nein
B-Stock ab 435 CHF verfügbar
525 CHF
Versandkostenfrei und inkl. MwSt.
Sofort lieferbar
Sofort lieferbar

Dieser Artikel ist auf Lager und kann sofort verschickt werden.

Informationen zum Versand
Dieses Produkt teilen
Ihre Ansprechpartner
Tel: 09546-9223-20
Fax: 09546-9223-24
Online-Ratgeber
E-Gitarren
E-Gitarren
E-Gitarren gibt es wie Sand am Meer – und mindestens genau so viele Typen und Hersteller!
 
 
 
 
 
Testfazit:
* Preise inkl. MwSt. zzgl. Versandkosten. Angebote solange Vorrat reicht. Für Druckfehler und Irrtümer wird keine Haftung übernommen. UVP = Unverbindliche Preisempfehlung des Herstellers.
(5)
Kürzlich besucht
Behringer RD-6-SR

Behringer RD-6-SR; Analog Drum Machine; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; Lautstärkeregler für alle Instrumente und Accent-Spur; integrierter Distortion-Effekt mit Reglern für Intensität und Tone; 16-Step Pattern-Sequencer; Speicherplätze für...

Kürzlich besucht
Fender Billie Eilish Concert Ukulele

Fender Billie Eilish Concert Ukulele, Konzert Ukulele, Decke und Korpus Sapele, Nato Hals, Griffbrett Hardwood laminiert, Hals Binding, 16 Bünde, Sattelbreite 35mm (1,375"), Mensur 381mm (15"), Fishman Kula Preamp, offene Mechaniken, Abalone Rosette, Finish matt Schwarz mit "blohsh" Symbole

Kürzlich besucht
Fender CuNiFe Wide Range Humb. Neck

Fender CuNiFe Wide Range Humbucker Neck; Telecaster Humbucker; Wiederstand: 10.1 - 10.7k; Farbe: Chrom

Kürzlich besucht
Blackmagic Design UltraStudio Monitor 3G

Blackmagic Design UltraStudio Monitor 3G; Videoausgabegerät für 3G-SDI- und HDMI-Playback über mit Thunderbolt 3 ausgerüstete Laptops oder Desktopcomputers; unterstützt professionelles SDI- und HDMI-Monitoring in 10-Bit-Broadcastqualität von Material aus gebräuchlichen Schnittsoftwares wie DaVinci Resolve, Final Cut Pro X, Media Composer und...

Kürzlich besucht
Presonus AudioBox 96 Studio Ult 25th An

Presonus AudioBox 96 Studio Ultimate 25th Anniversary Edition; Aufnahmestudio Set; bestehend aus: AudioBox USB 96 25th Anniversary Edition, Studio One Artist + Studio Magic Plugin-Suite (Ableton - Live Lite, Arturia - Analog Lab Lite 3 u. v. m.) (ESD-Download), Eris...

Kürzlich besucht
Nux Optima Air NAI 5

Nux Optima Air NAI 5; Effektpedal für E- & Akustik Gitarren; Dual-switch Akustikgitarrensimulator mit einem Vorverstärker für Akustik- und E-Gitarren, 15 eingebaute Akustikgitarrenprofile mit IR-Level Regler,9 Preset slots; Regler: Reverb, IR Level, Select, Gain, Bass, Middle, Treble; Drucktasten: Select; LED:...

Kürzlich besucht
Toontrack SDX Legacy Of Rock

Toontrack SDX Legacy Of Rock (ESD); Erweiterungspack für Toontrack Superior Drummer 3 (Art. 419735); produziert und aufgenommen von Eddie Kramer im Studio 1 der AIR Studios in London; 5 komplette Drumsets und eine große Auswahl an zusätzlichen Snares, Bassdrums und...

Kürzlich besucht
Omnitronic TRM-202 MK3

Omnitronic TRM-202 MK3; 2-Kanal-Rotary-Mixer mit 3-Band-Frequenzisolator für DJs; klassischer Rotary-Mixer mit 2 Eingangskanälen und integriertem 3-Band-Frequenzisolator für DJs; Gainregler, 2-Band-Equalizer (Höhen/Bässe) und Phono/Line-Umschaltung je Kanal; effektive Boost- und Kill-Funktion; Kill-Charakteristik erlaubt das völlige Auslöschen von Bässen, Mitten und Höhen für...

(1)
Kürzlich besucht
Magma CTRL Case MPC One

Magma CTRL Case MPC One, passend für Akai MPC One und Geräte mit ähnlicher Größe, 6 mm EVA-Durashock-Hartschaum und wasserabweisendes 600D Polyesteraußenmaterial, Robuster Reißverschluss, Praktisches Kabelmanagement-System, Schützender Noppenschaumstoff im Deckel, Kompatibel mit Decksaver Cover, Abmessungen außen 320 x 320 x...

(2)
Kürzlich besucht
Behringer RD-6-AM

Behringer RD-6-AM; Analog Drum Machine; Acid Smiley Edition; 8 Drum-Sounds: Bass Drum, Snare Drum, Low Tom, High Tom, Cymbal, Clap, Open Hi-Hat und Closed Hi-Hat; Lautstärkeregler für alle Instrumente und Accent-Spur; integrierter Distortion-Effekt mit Reglern für Intensität und Tone; 16-Step...

Kürzlich besucht
Kala U-Bass Nomad 4 NT

Kala U-Bass Nomad 4 NT, elektro-akustischer U-Bass, 528 mm (20 13/16") Mensur, 746 mm Gesamtlänge, Mahagoni Decke, Mahagoni Zargen und Boden, Mahagoni Hals, 16 Bünde, Palisander Griffbrett, Graph Tech NuBone Nut, Kompositkunststoff Sattel, Custom Black Die Cast Mechaniken, seidenmatte Oberfläche...

Feedback geben
Feedback Sie haben einen Fehler gefunden oder möchten uns etwas zu dieser Seite mitteilen?

Wir freuen uns über Ihr Feedback und werden Probleme möglichst schnell für Sie lösen.