Fishman Fluence Mod. Humb. V2 Set BKN

1

Tonabnehmerset für E-Gitarre

  • 2 aktive Humbucker
  • für Steg- und Halsposition
  • Output: High
  • Multi-Voice: 3 Voicings pro Tonabnehmer
  • Steg-Tonabnehmer - Voice 1: Modern Active High Output, Voice 2: Modern Passive Attack, Voice 3 (Single Coil): Heller, klarer Klang
  • Hals-Tonabnehmer - Voice 1 : Modern Active High Output, Voice 2: Crisp, Clean and Fluid, Voice 3 ( Single Coil): Gläserner, kristallklarer Ton
  • Magnetmaterial (Steg): Keramik, (Hals): Alnico 5
  • Anschlüsse: Multi Pin Anschluss & Löten
  • Farbe: Black Nickel
  • inkl. 2 x Volume Potis (Short Shaft 9,5 mm Gewindelänge) und 2 x Push/Pull Ton Potis (Short Shaft 9,5 mm Gewindelänge), Anschlußkabel, Stereoklinkenbuchse, Batterieklip, 2 x Kondensatoren (Tonregler), Befestigungsschrauben und Federn
  • made in USA
Erhältlich seit November 2023
Artikelnummer 576227
Verkaufseinheit 1 Stück
Aktiv Ja
Verdrahtung 4-adrig
Output High
Kappe Ja
Farbe Schwarz
Position Bridge, Neck
282 CHF
Versandkostenfrei und inkl. MwSt.
Sofort lieferbar
Sofort lieferbar

Dieses Produkt ist auf Lager und kann sofort verschickt werden.

Informationen zum Versand
1

1 Kundenbewertungen

4 / 5

Sie müssen eingeloggt sein, um Produkte bewerten zu können.

Hinweis: Um zu verhindern, dass Bewertungen auf Hörensagen, Halbwissen oder Schleichwerbung basieren, erlauben wir auf unserer Webseite nur Bewertungen von echten Usern, die das Equipment auch bei uns gekauft haben.

Nach dem Login finden Sie auch im Kundencenter unter "Produkte bewerten" alle Artikel, die Sie bewerten können.

Sound

Verarbeitung

1 Rezension

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
a
Good pickups, some quirks. Worth the price?
anotherharleybentonfan 15.01.2024
I got these as my first-ever Fishmans, after seeing a lot of hype and success of the originals. So with the version 2, I wired them onto a harley benton Dullahan and here are my thoughts

Pros:
- 3 voicings (Voice1: Active + Low gain pins, Voice 2: Passive, Voice 3: Single coils) and the sound is tight and clear. To me it sounds equally as nice as the EMG retroactive hot 70's, although the EMG doesn't have single coil voicing. While this still isn't true single coil sound, it's surprisingly chimy so I can appreciate that.
- they look SO FREAKING COOL.
- Comes with 4 pots (2 normal and 2 push-pull). All the parts in general were included. I used both push-pull pots, one for voice 2 and one for voice 3.


Cons:
- Hard to work with: The cables included are very flimsy, 16 awg wire I think? Not sure - but the wire feels cheap. At this price point I would like a bit sturdier wire.
- Included output jack feels alright. Same as the one on guitars out of the factory. Not a tight fit on the output jack like switchcraft jacks would be. Again, for the price, I would like a sturdier output jack.
- The pots are minipots which is more versatile - You can fit these in smaller cavities and have space for the battery. But it's easily possible to short pins on the pushpull pots because they are too close together and the pot is so tiny. The pots are short so you also have to buy long-shaft pots separately. Be careful when checking your measurements.
- I got the "brushed nickel" finish - but it literally just looks gloss black.
Sound
Verarbeitung
0
0
Bewertung melden

Bewertung melden