Zum Seiteninhalt

Gotoh RG105/RG130 String Ret. Set C

4.0 von 5 Sternen aus 7 Kundenbewertungen ()

Saitenniederhalter-Set

  • Setinhalt: 2 Stück
  • mit 1x 2,5 mm und 1x 5 mm Abstandshülsen
  • Finish: Chrom
  • made in Japan
  • Erhältlich seit Januar 2024
  • Artikelnummer 565680
  • Verkaufseinheit 1 Stück
3,55 CHF
Alle Preise inkl. MwSt.
Sofort lieferbar
1

7 Kundenbewertungen

4 / 5

Verarbeitung

5 Rezensionen

D
Tut was es soll
Dieter850 27.07.2025
Hab die Teile bei meinem selbstgebauten Strat-Hals verbaut. Die kleinen Schrauben halten dem Seitenzug stand und die Teile tun was sie sollen. Kaufempfehlung!
Verarbeitung
0
0
Bewertung melden

Bewertung melden

M
Finger weg, Schraube abgerissen!
Max_B. 13.07.2026
Trotz absolute ausreichenden Vorbohren ist die Schraube abgerissen☹️
Verarbeitung
0
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
LP
Quality parts
Lord Porkchop 29.08.2026
I got these for a Player II tele mostly to smoothen tuning for the two highest strings, and they seem to do the job adequately. Not perfect but that's the way it is with flat headstocks.

Fender says their hardware is chrome/nickel, and compared to these string retainers I would say that their tuners and the old stock retainer were more towards nickel, whereas these are clearly chrome. Doesn't make much difference on a part of this size, but if I would do it again I'd try the nickel ones.

The quality of these Gotohs seems good. I can't feel any sharp edges with my fingers and no strings have snapped yet.

Since I wanted to use the "spacers" to raise the strings I also had to use the longer screws that they came with. Those seem to be as wide as the originals, but the threading is very slightly different. I screwed them in anyway and they seem to hold fine. Possibly there could be problems if you'd try to go back to stock hardware.
Verarbeitung
0
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
a
Replacement for a HB TE-52 Telecaster
andrea00 28.06.2026
Good replacement for the original HB TE-52 String retainers. Be careful that screws are bigger and you will need to enlarge the holes. 2.5 mm drill bit recommended.
Verarbeitung
0
0
Bewertung melden

Bewertung melden