Zum Seiteninhalt

ObsidianWire T Cust. 4-Way Control Plate C

5.0 von 5 Sternen aus 1 Kundenbewertungen ()

Lötfreies (Solderless) Elektronik Austausch Set für E-Gitarre

  • für T-Style Modelle
  • Material: Messing
  • komplett bestückt mit ObsidianWire Vintage T-Style 4-Wege Elektronik inkl. Knöpfen und einer Pro-Wired-Buchse
  • einfache, lötfreie Installation
  • Custom 4-Wege Control Layout bietet seriellen "Humbucker" Modus
  • ein Treble Bleed verhindert Höhenverluste bei niedrigen Volume-Regler Einstellungen
  • hochwertigste Komponenten für eine deutliche Verbesserung gegenüber der Standard-Elektronik
  • Regler: Volume, Ton
  • Schalterpositionen: 1: Hals und Steg in Reihe (Humbucking), 2: Hals, 3: Hals und Steg parallel (traditionell T-Style), 4: Steg
  • Finish: Chrom
  • made in New Zealand

Lieferumfang:

  • Volumenregler: 1x CTS 250 kOhm, logarithmisch
  • Tonregler: 1x CTS 250 kOhm, logarithmisch
  • Gewindelänge: 9,5 mm
  • Achse: glatte Achse (Solid Shaft)
  • Kondensatoren: 1x 150 Serie Polyester 0,022µF
  • Schalter: Oak Grigsby 4-Wege Schalter
  • Klinkenbuchse: 6,3 mm Mono
  • Erhältlich seit November 2025
  • Artikelnummer 628335
  • Verkaufseinheit 1 Stück
  • Bauweise Prewired Harness/Wiring Kit
  • Widerstandswert 250 kOhm
  • Kennlinie Logarithmisch
  • Gewindelänge in mm 9,5 mm
  • Tandem Poti Nein
  • Push/Push Nein
  • Solderless Nein
  • Art der Achse Glatt
  • Art Schalter
  • Farbe Silber
133 CHF
Alle Preise inkl. MwSt.
Sofort lieferbar
1

1 Kundenbewertungen

5 / 5

Verarbeitung

1 Rezension

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
EY
Doesn't fit a Mexican Fender Player Telecaster
Eren Yeager 27.06.2026
You have to check if it fits yours, since it only fits standard Telecasters. On my case it didn't, and basically what I had to do was, grid the wooden plate cavity of the guitar's body a little bit (so the knobs fit), and also, drill a new screw hole.

I will probably create a reddit post regarding this. You have to start by positioning the side of the plate closer to the neck. That will be your baseline to make it fit.

The hole that has to be redone is the one closer to the bridge, not to the neck.

Other than that, I am extremely happy with the quality. The base player telecaster control plate is really bad quality, you will see it when you pull it out :D
Verarbeitung
0
0
Bewertung melden

Bewertung melden