Zum Seiteninhalt

QuickMount Pedal-Montageplatte

  • für Electro Harmonix Nano Series und MXR Effektpedale mit Standard-Gehäuse
  • Abstand der Montage-Löcher (B x T): 51 x 102 mm
  • montiert Effektpedale sicher auf RockBoard Pedalboards
  • ersetzt umständliches Klettband
  • wird auf vorhandenen Effektpedal-Rückplatten montiert und ist rückstandsfrei abnehmbar
  • keine dauerhaften Modifikationen erforderlich
  • hergestellt aus kohlenstoffverstärktem Verbundkunststoff
  • inkl. Ersatzschrauben und Silikon-Klebepad für Pedale ohne Rückplattenschrauben oder andere Konfigurationen der Schraubenlöcher
  • Erhältlich seit Mai 2020
  • Artikelnummer 493223
  • Verkaufseinheit 1 Stück
10,30 CHF
Alle Preise inkl. MwSt.
Sofort lieferbar
1

17 Kundenbewertungen

3.9 / 5

Verarbeitung

9 Rezensionen

H
Leider kaum brauchbar
HokiStudios 26.09.2021
Beigelegte Schrauben haben für MXR Boxen das falsche Gewinde (MXR Original hat Zollgewinde). Originalschrauben sind zu kurz. Das beigefügte Silikonpad liefert zu wenig Klebeleistung (Gerät fällt ab, wenn man das Board umdreht). Nutzen lässt sich das Teil nur mit Velcro Verklebung - dann kann man allerdings auch gleich die (preiswertere) UV Variante wählen.
Verarbeitung
0
0
Bewertung melden

Bewertung melden

MH
Unflexibel
Michael Ha 16.09.2024
Wenn ich ein Pedalboard erstelle und bis zu meinem Tod nichts daran verändere dann OK. Kleinere Quick Mount Platten wackeln. Die beigepackten Schrauben passen nicht immer und zerstören das original Gewinde.
Verarbeitung
0
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
SG
Wrong MXR/EHX replacement screws
Stefano Giuli 28.11.2020
Clever solution to avoid the use of velcro.
Unfortunately the RockBoard provided alternative screws are wrong for MXR and/or EHX pedals: the assembly of the QuickMount Type A with a MRX and/or EHX pedal with the RockBoard alternative screws will permanently oversize the pedal mounting holes, compromising the geometry of the pedal case without any possible corrective action.
This information, at least, shall be stated as a "warning" in the product instructions in order to avoid possible damages on any part.
Replacement screws with a correct diameter will be a good, and expected, product improvement.
Verarbeitung
4
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
b
Misleading compatibility description
bass1990 14.09.2025
Claims to be made for MXR (as well as EH) pedals specifically, but the screws that come with the quick mount (I think they are M4 screws) are not compatible with the MXR sizes, which are #6/32, what with MXR being US-based. To be clear, I have an MXR pedal from about 12 years ago, they have not changed screws in the meantime. And for what the QuickMount costs, it does not look like it would be that much to ask to also include four #6/32 screws adapted to the MXR pedals.

To top it off, the manual suggests to just glue the pedal to the quickmount in case the "screws don't work". At that point, unfortunately, I might as well be using velcro.

Other than that, the build is good, and the lock mechanism works as expected, hence the 4 starts on quality. But since it just doesn't work for its intended use case, I unfortunately have to give 1 start overall.
Verarbeitung
0
0
Bewertung melden

Bewertung melden